Wall Cabinet - Trim and Glue Up

With a couple of hours in the shop tonight, I was able to trim and sand the plugs I used to fill the miss-cut shelf pin holes in one side of the Wall Cabinet. Once that was done attention was turned to unclamping the door I glued up Sunday night. After removing the clamps it was time to remove the blue tape I'd used to keep the glue from going where it didn't belong. When I did that I discovered that I had put some of the tape in the wrong spot. That tape is now an integral part of the joint, and if you look very carefully there is a thin blue line in the joint part of the joint between the rails and stiles of the door frame. Oh well, someday I'll learn....